Aluminum Fence Supplies in Fort Lauderdale & Broward County

Yes — pool-code compliance is the most common reason South Florida buyers choose aluminum. Pool-code-compliant aluminum panels meet FL Statute 515.29: a 48-inch minimum residential pool-barrier height, picket spacing engineered to block a 4-inch sphere (so a child can’t get a foothold on the rails), and self-closing/self-latching gate hardware on any opening into the pool enclosure. We order pool-code lines in alongside the standard residential and ornamental panels, and we can talk through which one fits your project. The full 515.29 rules are in our Florida pool fence law guide and the spacing rule itself is in our 4-inch sphere rule explainer.

No. Aluminum doesn’t rust — it forms a thin protective oxide layer on the surface that prevents the kind of progressive corrosion that eats through galvanized steel and pits powder-coated steel at every cut edge. That’s why aluminum outlasts every other metal in coastal salt-air conditions and why we recommend it without hesitation for projects within a couple of miles of the ocean. Use stainless-steel fasteners with aluminum panels — that prevents galvanic corrosion at the connections, where dissimilar metals can otherwise react.

Three trade-offs. Weight: aluminum is roughly a third of steel by mass, which makes installation easier and gates lighter on the hinges. Corrosion: aluminum doesn’t rust; steel and wrought iron require ongoing painting and rust treatment, especially in coastal South Florida. Strength: steel and wrought iron are stronger per cross-section, which matters for high-security perimeters and impact-resistant applications. For pool fences, decorative runs, residential perimeters, and most light commercial work, aluminum’s corrosion advantage usually outweighs the strength gap.

Yes — quality aluminum panels are rackable, meaning the panel can flex (one rail leans relative to the other) to follow ground contour without the stair-step look you get from rigid panels. Not every panel racks, and there’s a maximum rake angle even on rackable panels, so check before you buy if your run crosses noticeable slope. Bring your slope measurements and we’ll point you at a panel that fits.

Wall thickness, height, and intended use case. Residential aluminum is typically 0.062 to 0.072 inches in wall thickness — light enough to install one panel at a time, decorative enough for front-yard and pool-surround visibility. Commercial-grade aluminum carries thicker walls — 0.080 inches and up — taller available heights, and a heftier post system, which is what you spec for school grounds, parking-lot perimeters, and any place where vehicle impact or sustained pressure is a real load case. We can supply both; the right answer depends on what the fence has to do.

In almost all cases, yes — and the same is true across Palm Beach and Miami-Dade. Each city has its own height limits, corner-lot rules, HOA overlays, and pool-barrier requirements on top of the county code. Our complete guide to fence permits in Broward County walks through what you need before breaking ground.

Both. There’s no minimum order, no membership card, and no “trade only” gate. Contractor pricing applies to everyone, whether you’re picking up a single replacement picket for a weekend repair or staging materials for a commercial perimeter.

Call us at (954) 306-6968 with your project address and material list and we’ll talk through delivery options for your job.