The Link Store stocks vinyl and PVC fence supplies for projects across Fort Lauderdale, Broward County, and the wider South Florida tri-county area — plus Miami-Dade NOA-certified hurricane-rated panels we can order in for High Velocity Hurricane Zone (HVHZ) projects on a short lead time. Privacy panels, picket runs, posts, gates, and hardware for homeowners and contractors. Walk-ins are welcome, contractor pricing applies to everyone, and there are no minimum orders whether you’re patching a back-yard run or staging a code-compliant commercial perimeter.
What we stock — vinyl & PVC fence supplies for every project
Backyard privacy runs, decorative front-yard pickets, pool surrounds, commercial perimeters with HVHZ code-compliance requirements — vinyl and PVC fence systems cover the spectrum without the rot, paint, or termite worries that come with wood. Bring your project description; we’ll match panel style, post spec, and hardware to the use case.
Vinyl & PVC fence panels
Pre-assembled vinyl and PVC panels in residential and commercial spec, with hurricane-rated NOA-certified panels available to order for HVHZ-jurisdiction projects:
- Picket panels — classic spaced pickets for the front yard
- Privacy panels — solid tongue-and-groove for back yards and pool surrounds
- Shadowbox panels — alternating boards on each side, more airflow, looks good from both sides
- Lattice-top panels — privacy below with decorative lattice on top
- Horizontal panels — modern look, planks running side-to-side
- Hurricane-rated, Miami-Dade NOA-certified panels — ordered in for code-compliant HVHZ installation, typically on a 3-day lead
Vinyl & PVC boards and pickets
Loose boards and pickets if you’d rather build panels on site or replace damaged sections — no rot, no termites, no painting either way:
- Vinyl boards in standard widths and lengths
- PVC boards for cleaner-finish residential work
- Dog-ear and flat-top picket profiles in standard fence heights
- White, tan, and gray colors in stock — colored throughout, never painted
Vinyl & PVC fence posts
Posts to match every panel system in our stock, plus aluminum-reinforced versions for the projects where wind load matters most:
- Vinyl posts in standard residential heights
- PVC posts for tighter cosmetic finish
- Aluminum-reinforced posts for hurricane wind loads and gate posts
- Concrete-in post bases for setting in fresh-pour foundations
Decorative post caps and finials
Caps protect the post tops and finish the look:
- Vinyl and PVC caps in matching white, tan, and gray
- Solar caps with low-glare LEDs for driveway and gate posts
- Decorative finials, ball tops, and ornamental caps
Vinyl & PVC fence rails
Top, middle, and bottom rails in vinyl and PVC, with metal-reinforced and composite alternatives where you want extra rigidity behind a decorative front face.
Hardware
What holds the system together cleanly:
- Vinyl-compatible brackets and rail-end fittings
- Stainless-steel screws — what we recommend within a couple of miles of the coast
- Hinges, latches, drop-rods, and gate stops
- Self-closing/self-latching gate hardware required for pool enclosures
- Post anchors and surface-mount hardware for hard-deck installs
Gates
Pre-assembled vinyl and PVC gates to match common panel styles, custom gates built to your opening, gate kits if you’d rather assemble on site, plus gate frames and gate wheels for sliding installations.
Cleaners and protective treatments
Vinyl is colored throughout, doesn’t rot, and doesn’t take stain — but Florida sun and pool-chemical splash still leave residue, so we stock the maintenance set:
- Vinyl-specific cleaners that lift mildew, algae, and pool-chemical residue
- UV-resistant sealants for protective overcoating on long-exposure runs
- Wax-based protectants for higher-end commercial installations
Tools
Manual post-hole diggers and two-person augers, post drivers, levels, drills, circular saws, framing nailers, and the safety gear you should already be wearing.
Site essentials
Concrete mix for setting posts, gravel for drainage at the base of the post hole, weed barrier for under decorative gravel runs, replacement parts for what storms loosened, vinyl-specific maintenance kits, and decorative accents like lattice panels and trellises if you want to dress up an otherwise-plain run.
Choosing the right vinyl for South Florida
Vinyl looks similar from panel to panel, but the spec sheet decides whether it lasts twenty years or starts chalking after three. Pick the grade, finish, and certification that match the conditions on your specific lot — and the regulatory bar your project has to clear.
Hurricane-rated panels and Miami-Dade NOA certification
Miami-Dade NOA (Notice of Acceptance) certification is the regulatory standard for materials installed in High Velocity Hurricane Zones — the parts of Miami-Dade and southern Broward where building code requires fence systems certified to specific wind-load standards. NOA-approved vinyl panels are tested and listed against documented wind ratings, which makes them the right (and often required) choice for commercial new-build, insurance-conscious projects, and code-compliant residential installs in HVHZ jurisdictions. We can order NOA-certified panel lines for HVHZ projects on a short lead time, and provide the manufacturer’s NOA documentation for your permit package.
UV stability and color longevity
Florida sun chalks and yellows budget vinyl within a couple of years; the better grades carry UV inhibitors blended into the polymer that keep panels looking new for the long haul. White is the most popular color and the most forgiving — it shows heat-cycle fade less than tan or gray, and pool-chemical splash less than darker shades. Ask which UV-stabilized line a panel comes from before you commit; the spec-sheet difference is real, and you can see it in the chalk lines on a five-year-old fence.
Maintenance vs wood
This is the big sell: vinyl needs an occasional rinse-down to keep it clean and almost nothing else. No annual sealing, no picket replacement on a schedule, no post rot, no painting. Wood fences in our climate need regular attention to last; most properly installed vinyl runs outlast their original homeowners. The trade-off is upfront cost — vinyl is more per linear foot than pressure-treated pine — but the lifetime cost reverses the math, especially on long runs and visible front-yard installations.
Pool fence applications
Vinyl is one of the most popular pool-fence materials in South Florida: clean lines, white doesn’t show pool-chemical splash, and a smooth panel surface is harder to climb than chain-link mesh. Florida Statute 515.29 sets the residential pool-barrier rules — 48-inch minimum height, no horizontal members on the outside that a child could use as toeholds, and self-closing/self-latching gate hardware required. The full breakdown is in our Florida pool fence law — Statute 515.29 guide and our pool fence height requirements guide.
Permits and Florida fence rules — what Broward County wants
Most fence installs in Broward, Palm Beach, and Miami-Dade need a permit, and the rules vary by city — height limits, setback distances, corner-lot visibility triangles, HOA overlays, and pool-barrier requirements that override everything else if your fence is part of a pool enclosure. HVHZ jurisdictions add another layer on top, with material-certification requirements that NOA-approved vinyl panels are designed to meet. Don’t skip this step:
- Complete guide to fence permits in Broward County
- Complete guide to fence permits in Miami-Dade County
- Complete guide to fence permits in Palm Beach County
- Florida pool fence law — Statute 515.29 guide
- Self-closing gate requirements for Florida pool fences
- What happens if you build a fence without a permit in Florida
Common questions about vinyl & PVC fence supplies
Are your vinyl fence panels hurricane-rated?
Yes — we can supply them. Miami-Dade NOA-certified vinyl panels approved for High Velocity Hurricane Zone (HVHZ) installation are available to order on a short lead time (typically a few days), and we provide the manufacturer’s NOA documentation for your permit package. NOA stands for Notice of Acceptance — it’s the Miami-Dade-issued certification that documents a product’s tested wind-load rating and approves it for use in HVHZ jurisdictions. If your project sits in an HVHZ zone, your insurance underwriter requires it, or your engineer specs it, that’s the line we’ll point you at.
What’s the difference between vinyl and PVC fencing?
Effectively the same product. PVC (polyvinyl chloride) is the polymer; “vinyl fence” is the trade name the industry settled on. The terms get used interchangeably in catalogs, on product labels, and on installer invoices. When someone says “vinyl fence” in South Florida, they almost always mean a PVC fence; if a brand markets it as “PVC” it’s the same material engineered the same way. The differences worth caring about are spec-level — extruded thickness, UV-inhibitor grade, NOA certification — not the material name.
How long does a vinyl fence last in South Florida?
Decades when properly installed and maintained — and “maintenance” for a quality vinyl fence means an occasional rinse-down with the garden hose. UV-stabilized vinyl significantly outlasts wood: no rot, no termites, no painting required. The most common failure modes are storm-driven physical damage and post-footing failures from inadequate concrete, neither of which is the panel material’s fault. Properly engineered NOA-rated systems are designed to take the loads our climate dishes out.
Will my vinyl fence yellow or fade in the Florida sun?
Quality grades hold their color well. The better vinyl panels carry UV inhibitors blended into the polymer that keep them from chalking and yellowing — that’s a feature of the spec, not all vinyl. Budget-grade vinyl will start to gray and chalk within a few years of intense Florida sun. White is the most forgiving color and the most popular; tan and gray show heat-cycle fade slightly more, and dark colors show it most. Ask which UV-stabilized line you’re being sold before you commit.
Can I use vinyl as a pool fence in Florida?
Yes — and it’s one of the most popular choices for pool surrounds. Florida Statute 515.29 sets the rules: 48-inch minimum height, no horizontal members on the outside that a child could use as toeholds, and self-closing/self-latching gate hardware. Solid privacy vinyl meets the climbability bar easily, and the smooth surface is harder to scale than chain-link mesh. The full breakdown is in our Florida pool fence law — Statute 515.29 guide; check it before you spec the project.
Do I need a permit for a vinyl fence in Broward County?
In almost all cases, yes — and the same is true across Palm Beach and Miami-Dade. Each city has its own height limits, corner-lot rules, HOA overlays, and pool-barrier requirements on top of the county code. HVHZ jurisdictions also require certified materials. Our complete guide to fence permits in Broward County walks through what you need before breaking ground.
Do you sell to homeowners, or just contractors?
Both. There’s no minimum order, no membership card, and no “trade only” gate. Contractor pricing applies to everyone, whether you’re picking up a single replacement picket for a weekend repair or staging materials for a code-compliant commercial perimeter.
Do you offer delivery in Broward County?
Call us at (954) 306-6968 with your project address and material list and we’ll talk through delivery options for your job.
Why builders and homeowners across South Florida choose The Link Store
- Quality vinyl and PVC selected for South Florida conditions — humidity, salt air, hurricane wind loads, and UV all factored into what we put on the racks, with hurricane-rated NOA-certified panels available to order for HVHZ projects
- Open to homeowners and contractors — no minimum orders, contractor pricing for everyone
- Knowledgeable staff who’ll help you spec the right materials and quantities the first time
- Conveniently located in Oakland Park, serving the tri-county area from a real working yard
★★★★★
“I couldn’t be happier with the service and products from The Link Store. Their vinyl fence supplies are of the highest quality, and the variety they offer is impressive. The staff guided me through every step of the installation, ensuring I had everything I needed. My fence looks amazing and has already withstood some tough weather without any issues. If you’re in Broward County and need fence supplies, The Link Store is the place to go!”
Where we deliver and supply — Broward County and beyond
We supply vinyl and PVC fencing materials to projects across South Florida from our Oakland Park location. Pickup is welcome any time we’re open; ask about delivery for your specific address.
- Broward County
- Fort Lauderdale, Hollywood, Pembroke Pines, Miramar, Coral Springs, Pompano Beach, Plantation, Davie, Sunrise, Weston, Deerfield Beach, Coconut Creek, Tamarac, Margate, Lauderhill, Oakland Park, Parkland, Cooper City
- South Palm Beach County
- Boca Raton, Delray Beach, Boynton Beach
- North Miami-Dade County
- Aventura, Miami Gardens, North Miami Beach
If your project is outside these areas but still in South Florida, give us a call — we may still be able to help.
Other supply categories
If you’re scoping a job that mixes materials, we stock the other major fence systems too:
Visit The Link Store or get a quote
Stop by the yard in Oakland Park to see materials in person, or call ahead with your measurements and we’ll have your order ready when you arrive. Quotes by phone are welcome — bring or send a photo of the run if you have one.
The Link Store 5059 NE 13th Ave, Oakland Park, FL 33334 (954) 306-6968 Mon–Fri 7:30 AM – 4:00 PM • Sat 7:30 AM – 12:00 PM • Closed Sunday